BQMMN - 5010 TONER, 5A0026B01

  • MSDS: BQMMN
  • Manufacturer: GENICOM CORP
  • Product Name: 5010 TONER, 5A0026B01
  • National Stock Number: 6850-01-338-3313
Product Identification

Product ID:5010 TONER, 5A0026B01
MSDS Date:04/19/1990
FSC:6850
NIIN:01-338-3313
MSDS Number: BQMMN

Responsible Party
GENICOM CORP
ONE GNICOM DR
WAYNESBORO, VA 22980
US

Emergency Phone: 703-949-1000

Info Phone: 703-949-1000;703-949-1194

Preparer: J.W. ROWE

Cage: 01526

Contractor
GENICOM CORP
WAYNESBORO, VA 22980-1999 US

Telephone: 703-949-1000

Cage: 01526

Ingredients

TONER; (ELECTROSTATIC)

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)<5 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE EXPECTED UNDER NORMAL
HANDLING AND USE CONDITIONS. IF DUSTY CONDITIONS OCCUR, MAY CAUSE
RESPIRATORY IRRITATION. CHRONIC: NONE KNOWN OR EXPECTED. EYE/SKIN:
NOT AN IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: IMMED FLUSH WITH WATER. WASHING ANY SUBSTANCE OFF SKIN
IS A GOOD SAFETY PRACTICE. EYES: IMMED FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. IF IRRITATION DEVELOPS, CALL A PHYSICIAN. INGEST:
IMMED DR INK WATER TO DILUTE. INHAL: REMOVE TO FRESH AIR.

Fire Fighting

Extinguishing Media:WATER SPRAY, DRY CHEM, ALCOHOL FOAM, CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY SHOULD BE USED TO COOL FIRE EXPOS CONTRS &/OR DISPERSE
UNIGNITED VAPS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WEAR NIOSH/MSHA APPRVD DUST RESP.FOLLOW OSHA
REGS FOR RESP. USE (SEE 29CFR1910,134), WEAR GOG, IMPERVIOUS
COVERALLS, GLOVES & BOOTS IF EXCESS DUSTING OCCURS. CLEAN UP &
PLACE IN AN APPROP CONTR & SEAL . IN EVENT OF LG SPILL, CALL EMER
(SUPPDATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT TAKE INTERNALLY. AVOID CONT
W/EYES/SKIN/CLTHG. UPON CONT W/SKIN/EYES, WASH OFF W/WATER. AVOID
BRTHG DUST. STORE IN A COOL, WELL-VENTD PLACE.
Other Precautions:STORE AWAY FROM COMBUSTIBLES AND HEAT SOURCES.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:BEYOND GOOD ROOM VENTILATION NORMALLY REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC: TELEPHONE NUMBER (703) 949-1000.

Chemical Properties

Spec Gravity:1.1(H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE BLACK POWDER, ESSENTIALLY ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:EXCESS HEAT.
Hazardous Decomposition Products:NONE KNOWN.

Disposal

Waste Disposal Methods:DISPOSE OF CONTAMD PROD, EMPTY CONTRS & MATLS
USED IN CLEANING UP SPILLS/LEAKS IN A MANNER APPRVD FOR THIS MATL.
CONSULT APPROP FED, ST & LOCAL REGULATORY AGENCIES TO ASCERTAIN
PROPER DISPOSAL PROCEDU RES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.